Engineering Training Courses

If you can't find what you want, Ask Us.

Refine Your Results

reset

Filter by Category

Location

Dates

FEATURED VENDORS

Showing 401-416 of 416 results Sort by:

Courses

  • 401 Request Info

    echnical Safety BC From Design to Operation

    The purpose of this seminar is to increase the skill and knowledge of Engineers, managers and operators in Technical Safety BC, and Safety Code requirements in British Columbia Oil and Gas industries. Seminar Objectives The overall objective of this seminar is to give students a background in: 1. Technical Safety BC requirement for Design, Fabrication, Construction, Welding, Inspection, In-service Inspection of Pressure Equipment. 2. Interfaces between Technical Safety BC and OGC (British Columbia Oil and Gas Commission)
  • 402 Request Info

    Overpressure Protection Training

    This one day course will cover three principal aspects of overpressure protection. Firstly the regulatory requirements that must be met in Alberta. Secondly the many ways in which overpressure can occur. Thirdly the ways to mitigate against overpressure. Topics such as relief scenarios, ABSA, ASME, double contingency together with an in depth review of relief device types and sizing will be covered. Examples of relief scenarios and calculations to size relief devices will be included. This course will benefit designers of facilities, operators of these facilities and process safety personnel.
  • 403 Request Info

    Giving Constructive Feedback – Peer to Peer

    This 1-day course addresses the challenges and barriers facing many individuals in the workplace regarding the giving of constructive feedback. Often a difficult and awkward topic of conversation, this session will explain the rational for providing constructive feedback, along with skills and techniques for having difficult yet productive conversations with colleagues. Feedback scenarios, small and large group discussions, and learning activities will provide participants with opportunities for peer-to-peer practicing for giving constructive feedback.
  • 404 Request Info

    Centrifugal Pump Hydraulics, Sizing And Design Practices

    This one-day course is for technical personnel involved in the sizing, selection and operation of Pumps in Oil and Gas Processing facilities. The course focuses on the hydraulic principles of centrifugal pumps, their sizing and system design. You will learn quick pump calculations for conceptual studies along with rules of thumb as well as rigorous calculation required during detailed engineering phase. This course is tailored for individuals who have some pump basic knowledge and/or are seeking a deeper understanding of how centrifugal pumps work, and when and how to apply this knowledge. This course benefits those who are involved in some facet of pump design or application. Technicians, Operators and Junior Engineers will find this course especially helpful and relevant.
  • 405 Request Info

    Working in a Matrix - Influencing without Authority

    Be a more effective project or matrix team manager – Work more effectively within a matrix environment – Influence others to agree with you – Get things accomplished without having direct line authority – Be a more effective communicator – Reach different communication & personality styles more effectively – Understand and remove the most common listening barriers – Communicate technical information to non-technical people more successfully
  • 406 Request Info

    Management Skills for Technical Professionals

    Understand differences between technical & non-technical employees – Work with different people/personalities more successfully – Improve communication & listening skills – Increase awareness & empathy to work better with non-technicals – Assist technical employees to work/communicate better with non-technical coworkers – Define & communicate vision & expectations more effectively – Align individual, team & department goals – Handle difficult/sensitive situations more effectively
  • 407 Request Info

    Managing Risks in High-Stakes Projects

    Builds practical skills in using tools & techniques to identify the sources of uncertainty that give rise to risks in high-stakes projects. Also, how to isolate and absorb the uncertainty factors to limit their potential impact. See online description for additional details.
  • 408 Request Info

    Failure Mode and Effects Analysis (FMEA)

    Guides participants through the logic and methodology of FMEA. Two widely-used types of FMEA are described in detail: Design FMEA & Process FMEA. Participants work in teams to apply the methodology to a design & development scenario.
  • 409 Request Info

    Geometric Dimensioning and Tolerancing Fundamentals

    Who should attend: All those who use GD&T to design, produce and inspect parts: mechanical engineers, designers, managers, production planners, inspectors, machinists, supplier quality personnel, etc. The Need: A concurrent engineering team equipped with the proper tools has the ability to shorten time to market, reduce engineering changes and create a robust quality design. Design decisions should be optimized for quality cost and delivery at the sketch phase when an engineering change costs a few cents rather than hundreds or thousands of dollars months later. The drawing is the common thread of the concurrent engineering team. Course description: (3 days) You'll discover the major pitfalls of traditional coordinate tolerancing - and how they may be overcome by using Geometric Tolerancing. Then, starting with your basic blueprint knowledge, you'll learn the symbols, terminology and rules of Geometric Tolerancing as prescribed in the current standard (ASME Y14.5-2009)
  • 410 Request Info

    Geometric Dimensioning and Tolerancing Applications

    (16 hours) Who should attend: This seminar is intended for those who have already taken a fundamentals course in geometric dimensioning and tolerancing in accordance with the ASME Y14.5M-1994 standard. When representatives from design, quality, production and suppliers can attend, this course is most effective. Course description: You will learn how to apply GD&T to a variety of situations including your own parts. Sharpen your Geometric Tolerancing skills, fill in gaps, get your questions answered, make GD&T more useable, reduce product cost, improve datum selection and create robust designs. Learn how to use the GD&T Hierarchy. Advanced concepts on the application of profile and position as well as fixed and floating features will be discussed. Learn how to properly select datum features and allocate tolerances. Expand your knowledge of simultaneous requirements, composite tolerancing, profile tolerancing, robust design and boundary calculations.
  • 411 Request Info

    Tolerance Stack-Up (TSU) Training

    2 Day Class Who should attend: Designers and Design Engineers and those trouble shooting production problems who have already taken a fundamentals course in geometric dimensioning and tolerancing in accordance with the ASME Y14.5M-1994 standard. Additionally, a GD&T Applications course is recommended. The Need: Designers and Design Engineers must be able to determine how robust a design is at the sketch phase. Fit of parts is relatively easy to predict. Shift of parts within an assembly requires an understanding of advanced tolerancing concepts. This knowledge is required to perform manual 2-D and computer assisted 3-D analysis. Course Description: This advanced training teaches you how to study the cumulative effect of part tolerances in order to reduce product costs. You'll learn how to establish part tolerances, perform 2-D analyses of designs, use geometric tolerances in stack ups, and much more. Numerous assemblies will be studied.
  • 412 Request Info

    Design For Assembly (DFA) Training

    16 Hours The design of a part is the first step in its manufacture and it is then that the cost of manufacturing is committed. To remain competitive as a world class manufacturer, the design of a product must incorporate assembly methods, materials, tooling and the capabilities of the site(s) of manufacture at the conceptual phase. DFA is a tool for evaluating product designs to improve quality, cost and delivery at the earliest phase of design. It will primarily drive to reduce part count within and around the assembly and/or combine parts. DFA stresses the use of simple designs, modular assemblies, multi-functional parts, self-locating features, parts standardization and elimination of adjustments.
  • 413 Request Info

    Process Capable Tolerancing® (PCT) Training

    1 Day Who should attend: Designers, Design Engineers and those involved with supplier selection. The statistical concepts behind the process capability index Cpk and its importance to the engineers and designers will be explained in layman's terms. After presenting an introduction to tolerance stack up using the vector method, the Process Capable Tolerancing™ (PCT) methodology for creating components and products that are robust to process variation is presented. The Tolerance Capability Expert™ (TCE) software which facilitates the application of this methodology is demonstrated. The methodology is illustrated through industrial case studies
  • 414 Request Info

    Industrial Mathematics Class

    40 Hours Can't remember how to find an average? Need to know how to do conversions? Need help with trig functions? This is the course for you or your employees. Coverage of all topics will require 40 hours of training. The course may be modified to meet your specific needs. Topics Covered: Arithmetic of Whole Numbers, Fractions, Decimals, Percent, Measurement, Pre-Algebra, Basic Algebra, Practical Plane Geometry, Solid Figures and Geometric Constructions, Triangle Trigonometry and Advanced Algebra
  • 415 Request Info

    Print Reading For Industry Class

    40 Hours An important topic for purchasing agents to engineers, this course can be taught to everyone at once. Coverage of all topics will require 40 hours of training. The course may be modified to meet your specific needs. Topics Covered: Drawing Conventions, Projections, Dimensioning, Reading Multi-view Drawings, Auxiliary Views, Common Features, Sectional Views and Screw Threads
  • 416 Request Info

    ARC004 - ARC's Advanced Cost Accounting: Using Product Cost Information as a Strategic Weapon

    This program cuts to the chase. We aimed this program at serious cost professionals who are past the simple labor, material, and overhead variances, and are facing the challenge of identifying and reporting the true cause / effect relationship of the strategic and tactical activities of the company and their impact on the factory floor. You will take a step-by-step walk through typical cost accounting procedures. You will solve realistic cost-process problems than can be immediately applied to your unique environment...comparing job-costing and process-costing procedures...determining how to apply direct costing techniques...and developing a master plan that coordinates accounting and budgeting.