Engineering Skills

If you can't find what you want, Ask Us.

Refine Your Results

reset

Filter by Category

Location

Dates

FEATURED VENDORS

Showing 1-20 of 404 results Sort by:

Courses

  • 1 Request Info

    Certified Cost Professional (CCP) Exam Review Course

    CCPStudy is a product of 3Fold Education Centre, We are offering certified cost professionals (CCP) or Cost engineering (CCE) exam review course by 100% online. We are the first AACE approved education provider to provide Certified Cost Professional CCP exam review course 100% online. We helped more than 15000 candidates in various international certification preparation and we trained more than 7000 professionals worldwide in online CCP and class room based CCP courses. Our virtual classroom technology can help students to study from anywhere in the world. Our training program consists of the following pre-recorded modules. 3 full length mock exam 10 exam tips and tricks video 40 On-demand video lessons 4 Module wise exams Technical paper draft review (once) Certification application support For further details visit our website http://www.ccpstudy.com
  • 2 Request Info

    Effectively Manage Technical, IT, and Engineering Professionals

    Managing technical professionals requires special skills to apply general management principles. o Get results efficiently: plan, delegate, motivate, coach o Communicate; build engaged, high- performing team. o Experiential learning: customized case studies, self-assessments, Action Plan
  • 3 Request Info

    Management/Leadership Power Tools for Engineers

    Engineers become managers because of technical expertise. They need a different skill set. Learn to communicate, plan, motivate, delegate, and coach effectively and efficiently using powerful, proven approaches tailored to your specific situation.
  • 4 Request Info

    AB RSLogix PLC Training Seminar - St. Louis

    Hands-On PLC Training Workshop (PLC: Programmable Logic Controllers). Start with basics move on to troubleshooting, then learn the foundations of good PLC programming while writing your first IEC-1131 compliant PLC program. (1.6 CEU) If you would like to learn how to reduce downtime thru PLC training, please sign up immediately for our 3 day workshop in Saint Louis. (As there is limited seating and these fill up quickly.) Bonus: In addition to every attendee being sent home with extra PLC learning material ... as an additional bonus, we give every attendee our RSLogix 5000 PAC training software for free too! No other provider can come close to the value of this PLC training workshop! So register soon.
  • 5 Request Info

    AB RSLogix PLC Training Workshop

    Reduce downtime thru PLC training.You will get hands on training with the lap top using RS Logix and PLC5, SLC500 and Micrologix PLC.This course qualifies for 1.6 CEU and you receive a certificate and software simulation CD. Now also free RSLogix 5000 training software to every attendee. No one else comes close to matching the value we offer.
  • 6 Request Info

    RSLogix 5000 Training Seminar - St. Louis

    This hands-on course starts with an overview of the AB ControlLogix system architecture and an introduction of RSLogix 5000 software. Then the fundamentals of editing ladder logic , Routines, Tag Database, PLC analog Input / Output modules, advanced features available in the Tag Database, troubleshooting and communication modules. This 3 day ControlLogix course is scheduled the week after our SLC500/PLC5 class in St. Louis, so you can attend both seminars consecutively. Attending both seminars will give you a clear understanding of Allen Bradley's legacy PLCs and ControlLogix/Compactlogix series while working with PLCs safely and reliably to reducing downtime. ControlLogix Training in St. Louis, MO (limited seating, these fill up quick!)
  • 7 Request Info

    AB RSLogix PLC Training Seminar - Atlanta

    Business Industrial Network will provide their leading expert on Allen-Bradley Programmable Logic Controller (PLC) troubleshooting as your instructor. (1.6 CEU) Free PLC, trainer and 1 gig of extra learning material and a free copy of our RSLogix 5000 training software to every attendee!
  • 8 Request Info

    ViewTrainer - RSView HMI Training Software

    This NEW RSView32 HMI Training Software ( The ViewTrainer ) includes RSLinx comm, DDE topics and excel, rsview graphics, quiz, laboratory manual and much more.
  • 9 Request Info

    Creation of DHFs, DMRs, and DHRs utilizing the principles of Lean Documents and Lean Configuration

    The Theory of Lean Documents is the product of applying lean principles to the creation, design, process, and management of controlled documents typically found in regulated industries. Just as lean principles challenge traditional process concepts and "push" systems, many traditional document practices are artefacts of a flawed approach. Lean documents presents a fresh departure from these practices, while building upon proven principles. Lean configuration comes from the same principles, utilizing the unique power of software solutions to take over functions that had previously burdened controlled "paper" documents.
  • 10 Request Info

    Introduction to Design of Experiments

    Design of Experiments is a vital tool for process improvement and root cause analysis. It allows experimenters to determine beyond a quantifiable reasonable doubt that an experiment improves the process, or that there is a difference between treatments; choices among the factors of the cause and effect diagram. While comprehensive mastery of DOE requires full college-level courses, enough basics can be taught in an hour to enable the attendee to know the key considerations in the design of an experiment, and also interpretation of its results. The material on hypothesis testing will also position the attendee to understand statistical process control (SPC) and acceptance sampling.
  • 11 Request Info

    Risk Based Thinking in and Beyond ISO 9001:2015

    ISO 9001:2015's new clause for "actions to address risks and opportunities" is among the biggest revisions to the standard. Risks and opportunities that relate to waste or muda, and also to changes in technology, markets, and distribution channels are however not explicitly covered, and are therefore not explicitly auditable, even under the new standard. This credit risk mitigation presentation will therefore focus on use of the standard as a servant whose purpose is to promote the organization's competitiveness and profitability, rather than a master whose requirements the organization has to satisfy to get the ISO certificate. ISO 9001 becomes the servant when the organization uses it as a framework to drive continual improvement and to identify risks and opportunities that lie well beyond the scope of the standard.
  • 12 Request Info

    Collaboration 4 Project Results

    High energy, interactive 3-day PMBOK-based course for Proj.Mgrs. Teaches processes/ techniques for shaping, energizing, motivating project teams to get faster/better results with Collaboration,“The Tenth Knowledge Area.Bob Moir 404.338.0715
  • 13 Request Info

    Extracting Information from Geochemical Data

    Most specialists strongly recommend to sample every meter of the drill core or of a trench and to use multi element analysis, rather than just asking the laboratory for gold test. There are also many other types of analysis that are ignored by the industry. But even when such analyses are requested, most of the time the fed geologist is not well trained on the necessary techniques and methods to extract all the information contained in the data. This seminar will teach you what to ask and how to extract all the important information of your data
  • 14 Request Info

    Applied Statistics for Scientists and Engineers - 2-day In-person Seminar

    Throughout 21 CFR and guidance documents for the pharmaceutical, biopharmaceutical, and medical device industries, the application of statistical methods are specified for: setting validation criteria and specifications, performing measurement systems analysis (MSA), conducting stability analysis, using design of experiment (DOE) for process development and validation, developing process control charts, and determining process capability indices. Different statistical methods are required for each of these particular applications. Data and tolerance intervals are common tools used for setting acceptance criteria and specifications. Simple linear regression and analysis-of-covariance (ANCOVA) are used for setting expiries and conducting stability analysis studies.
  • 15 Request Info

    Webinar on Airport Traffic Control Tower - How Air Traffic Controllers Make it Work

    The initial subject focuses on the primary control positions located in the tower. Each position is discussed to identify the responsibility of the control position and the types of control strategies that are employed to safely and efficiently manage aircraft operating on the Airport Movement Area (Ground Control) and within the Airport Traffic Area (Local Control). Also addressed are the operational considerations associated with the close interaction with the Terminal Radar Approach Control (TRACON).
  • 16 Request Info

    Webinar on Design Inputs - Design Outputs Traceability Matrix - Principles of Lean Documents and Lean Configuration

    Overview: Design Inputs, Design Outputs, and Traceability matrices present a challenge to almost all industries that apply design controls. Typically, these cause the creation and maintenance of duplicate information across various documents - a major source of errors. This webinar applies the Theory of Lean Documents and the corresponding Theory of Lean Configuration to avoiding these errors, while presenting a fresh new approach to these key and related documents.
  • 17 Request Info

    Design Inputs Design Outputs Traceability Matrix

    Overview: If your design and manufacturing resources are spending too much time on documentation and not enough time on actual design and manufacturing you as a manager need to be looking for ways to simplify their work. Areas Covered in the Session: Brief introduction to Lean Documents and Lean Configuration. Quality System Regulation, 21 CFR Part 820, and ISO 13485 as these apply to design control documents. Traceability Matrix. Applying lean document and lean configuration principles to the above. Bringing it all together
  • 18 Request Info

    Project Management Business Administration

    Overview: This course begins with general principles of Project Management Business Administration (PMBA) and continues to elaborate on specific topics relevant to pre-bid scenarios, execution phase strategies, and close out dilemmas. Why should you Attend: Do you know how many successful projects it takes to cover the loss from one bad project? Do you understand the stress on a company when a project does not have positive cash flow? Do you want to be sure that when layoffs come around, that you are kept on board?
  • 19 Request Info

    Overlap between Engineering and Psychology - 2017

    Overview: This course will show how psychological factors enter into the engineering profession. Many aspects of the engineering profession are nontechnical such as balancing "green" practices with an effective cost structure, engineering ethics, how detail oriented should an engineer be, employee mental fitness for work, manager's leadership style, and communication between engineers. There will be at least one brief exercise that students will conduct on their own with guidance from the Instructor.
  • 20 Request Info

    FDA Issues and its FDA Data Integrity - 2017

    Overview: Many of the data integrity issues that plagued the US drug and biologics industry were eliminated by detailed regulations and stricter enforcement, but many of the problems have resurfaced in recent years among the multitude of foreign manufacturers whoare not familiar with US practices.