Six Sigma (Lean, etc.)

If you can't find what you want, Ask Us.

Refine Your Results

reset

Filter by Category

Location

Dates

FEATURED VENDORS

Showing 1-20 of 54 results Sort by:

Courses

  • 1 Request Info

    Webinar On Principles of 21 CFR Part 820 Quality System Regulations

    All life science businesses are required to maintain their Quality Management System (QMS) processes in a state of control, via controlled documents and objective evidence in the form of records. Medical device manufacturing plants, required to follow 21 CFR Part 820, have the additional responsibility to ensure that each and every step of the manufacturing process is controlled by work instructions, SOPs, set-up instructions, equipment maintenance, and support functions, and that evidence of this work is maintained by controlled records.Price:$200.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link https://onlinecompliancepanel.com/webinar/21-CFR-PART-820-QUALITY-SYSTEM-REGULATION-506042/NOVEMBER-2017-ES-TRAININGREGISTRY
  • 2 Request Info

    Webinar On QSR and ISO Requirements for Supplier Evaluation and Assessment

    Supplier qualification and assessment is required in both the QSR regulations and ISO standards. Many companies spend a great deal of time and money in pursuit of compliance with this. Many companies can spend much less time and money, and still be in control of their suppliers and in compliance with the regulations. This presentation will review the QSR and ISO requirements for supplier evaluation and assessment, and provide cost efficient, equally compliant options to many of the most common practices.Price:$250.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link https://onlinecompliancepanel.com/webinar/BEST-PRACTICES-IN-SUPPLIER-MANAGEMENT-508203/OCTOBER-2017-ES-TRAININGREGISTRY
  • 3 Request Info

    Webinar On How to Perform Measurement Systems Analysis

    Measurement systems analysis (MSA), or gage reproducibility and repeatability (R&R), quantifies measurement variation from inspectors (reproducibility) and the gage itself (repeatability). This returns a measurement of the gage's precision, or ability to get the same result consistently from the same part. Precision is the counterpart to accuracy, or the gage's ability to get, on average, the correct measurement from a part. Gages must be precise as well as accurate to perform their jobs. While ISO 9001:2008 required only accuracy (as ensured by calibration), the automotive ISO/TS 16949 standard requires MSA as well.Price:$200.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link https://www.onlinecompliancepanel.com/webinar/SYSTEM-ANALYSIS-508858/JULY-2017-ES-TRAININGREGISTRY
  • 4 Request Info

    Webinar On Why and How to use Design of Experiments

    Design of Experiments (DOE) is a key tool for quality management and continual improvement, as well as part of the Six Sigma body of knowledge. It allows the scientific determination, beyond a quantifiable reasonable doubt, of whether there is a difference between two or more treatments (such as a control or experiment) or treatment combinations. This in turn allows us to determine whether a proposed improvement worked and also to pinpoint the source of poor quality when a cause and effect diagram suggests multiple sources.Price:$200.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link http://onlinecompliancepanel.com/webinar/DESIGN-EXPERIMENTS-501996/JANUARY-2017-ES-TRAININGREGISTRY
  • 5 Request Info

    Webinar On 21 CFR Part 820 - Quality System Regulation - Applying Principles of Lean Documents and Lean Configuration

    All life science businesses are required to maintain their Quality Management System (QMS) processes in a state of control, via controlled documents and objective evidence in the form of records. Medical device manufacturing plants, required to follow 21 CFR Part 820, have the additional responsibility to ensure that each and every step of the manufacturing process is controlled by work instructions, SOPs, set-up instructions, equipment maintenance, and support functions, and that evidence of this work is maintained by controlled records.Price:$250.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link http://onlinecompliancepanel.com/webinar/21-CFR-PART-820-QUALITY-SYSTEM-501907/DECEMBER-2016-ES-TRAININGREGISTRY
  • 6 Request Info

    Two Days Workshop On Quality Management Systems that Comply with ISO13485:2016

    Quality Management Systems that Comply with ISO13485:2016" has been pre-approved by RAPS as eligible for up to 12 credits towards a participant's RAC recertification upon full completion.Price:$1400.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link http://www.onlinecompliancepanel.com/workshop/Quality-Management-Systems-that-Comply-with-ISO13485-2016-800016/NOVEMBER-2016-ES-TRAININGREGISTRY
  • 7 Request Info

    Webinar On SMED - Single Minute Exchange of Die (reduced changeover)

    (SMED) is a methodology that was created by Shigeo Shingo in the Toyota press room to reduce the time needed to setup and changeover the huge stamping presses. The goal is first to reduce setup times by 50% and ultimately to less than 10 minutes.Price:$200.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link http://onlinecompliancepanel.com/webinar/SMED-SINGLE-MINUTE-EXCHANGE-DIE-501874/NOVEMBER-2016-ES-TRAININGREGISTRY
  • 8 Request Info

    Webinar On Best practices for selecting E-QMS system

    This course will cover considerations and requirements when selecting an Electronic Quality Management System (E QMS).Due to the current climate of regulatory compliance there is a need for companies to select the appropriate electronic quality management systems (E QMS).Price:$250.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link http://onlinecompliancepanel.com/webinar/SELECTING-E-QMS-SYSTEM-501443/AUGUST-2016-ES-TRAININGREGISTRY
  • 9 Request Info

    Webinar On Reduce Inspection Costs with Sequential Sampling in ANSI/ASQ Z1.4

    Sequential sampling, in which the sample size is one, minimizes the average sample number (ASN) necessary to reach a decision as to whether to accept or reject a lot. This, in turn, minimizes the mandatory but non-value-adding inspection activity.Price:$200.00. Contact info : OnlineCompliancePanel Phn. no. +1-510-857-5896 Fax-+1-510-509-9659 info@onlinecompliancepanel.com Event link http://onlinecompliancepanel.com/webinar/REDUCE-INSPECTON-COSTS-SAMPLING-ANSI-ASQ-Z1-4-501493/JUNE-2016-ES-TRAININGREGISTRY
  • 10 Request Info

    Six Sigma Yellow Belt: Improve and Control

    +Six Sigma Improvement Techniques
  • 11 Request Info

    Six Sigma Yellow Belt: Analyze

    +Lean Tools and FMEA in Six Sigma
  • 12 Request Info

    SIx Sigma Yellow Belt: Measure

    +Basic Statistics for Six Sigma +Data Types and Data Collection in Six Sigma +Six Sigma and Measurement System Analysis
  • 13 Request Info

    Six Sigma Yellow Belt: Define

    +Identifying Six Sigma Projects +Six Sigma Project Management Basics
  • 14 Request Info

    Six Sigma Yellow Belt: Six Sigma Fundamentals

    +Six Sigma and Lean Foundations and Principles +Six Sigma Team Basics, Roles, and Responsibilities +Six Sigma Quality Tools +Six Sigma Metrics
  • 15 Request Info

    Certified Manager of Quality/Organizational Excellence

    +Leadership +Team Dynamics +Developing and Deploying Strategic Plans +Managerial Skills and Abilities +Communication Skills and Project Management +Quality Systems, Models, and Theories +Problem-Solving and Process Management Tools +Measurement: Assessment and Metrics +Customer-Focused Management +Supply Chain Management +Training and Development
  • 16 Request Info

    Six Sigma: Champion Training

    +Introduction to Six Sigma for Champions +Six Sigma Process Improvement +Six Sigma Projects and Project Teams +Managing and Deploying Six Sigma
  • 17 Request Info

    Purchasing and Vendor Management Essentials

    +Fundamentals of Purchasing and Vendor Management +Purchasing: Finding Sources of Supply +Selecting Suppliers and Administering Contracts +Evaluating Supplier Performance and Managing Supplier Relationships
  • 18 Request Info

    Managing Customer-Driven Process Improvement

    +Customer-driven Process Improvement: Basic Framework +Customer-driven Process Improvement: Identifying Customer Needs +Customer-driven Process Improvement: From Customer Needs to Process Requirements +Customer-Driven Process Improvement: Mapping and Measuring Processes +Customer-driven Process Improvement: Analyzing Process Problems +Customer-Driven Process Improvement: Identifying Improvement Ideas and Solutions +Customer-driven Process Improvement: Implementing and Maintaining Improvements
  • 19 Request Info

    Operations Management

    +Operations Management and the Organization +Operations Management: Product and Service Management +Operations and Supply Chain Management +Operations Management: Inventory Management +Operations Management: Forecasting and Capacity Planning +Operations Management: Operations Scheduling +Operations Management: Management of Quality +Operations Management: Facilities Planning and Management
  • 20 Request Info

    Fundamentals of Lean for Business Organizations

    +Introduction to Lean for Service and Manufacturing Organizations +Using Lean for Perfection and Quality +Lean Tools and Techniques for Flow and Pull +Reducing Waste and Streamlining Value Flow Using Lean +Value Stream Mapping in Lean Business +Applying Lean in Service and Manufacturing Organizations +Five Steps to Perfection: Implementing Lean +Value Stream Maps for Non-manufacturing Processes